- <Home>
- DEWALT>
- Power Tools>
- Cordless Tool Kits>
- <Cordless Kits>
- DCK663P3 XR Brushless 6 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK663P3
DEWALTDCK663P3 XR Brushless 6 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK663P3
The DEWALT DCK663P3 XR Brushless 6 Piece Kit contains the following:
1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.
Chuck: 13mm Keyless
No Load Speed: 0-550/0-2,000/min.
Impact Rate: 0-9,350/34,000/bpm
Torque: 27/70Nm, 15 Settings
Capacity: Masonry/Steel 13mm, Wood 40mm
1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.
Bit Holder: 6.35mm (1/4in)
No Load Speed: 0-1,000/0-2,800/0-3,250/min.
Impact Rate: 0-1,800/0-2,900/0-3,800/bpm
Max. Torque: 26/80/205Nm
Weight: 1.56kg
1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling on wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work.
No Load Speed: 5,500/min.
Max Cutting Depth @90º: 64mm
Blade: 184 x 16mm Bore
Bevel Capacity: 57°
1 x 18V DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to central motor position. The four position blade clamp allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut.
Strokes at No Load: 0-2,900/min.
Stroke Length: 28.6mm
Capacity: Wood 300mm, Steel Sections & Pipes 100mm, PVC 160mm
Weight: 2.3kg
1 x 18V DCG405 125mm XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.
No Load Speed: 9,000/min.
Disc Diameter: 125mm
Spindle Thread: M14
Weight: 1.75kg
1 x 18V DCL050 XR LED Work Light with variable light settings for maximum brightness or extended run time and a broad and even beam pattern. Perfect for inspecting areas without electricity or natural light. The articulating head has nine positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use.
Light Output: 250-500 lumens
Protection Class: IP54
Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger and 1 x DS300 TOUGHSYSTEM™ Toolbox
The DEWALT DCK663P3 XR Brushless 6 Piece Kit contains the following:
1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.
Chuck: 13mm Keyless
No Load Speed: 0-550/0-2,000/min.
Impact Rate: 0-9,350/34,000/bpm
Torque: 27/70Nm, 15 Settings
Capacity: Masonry/Steel 13mm, Wood 40mm
1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.
Bit Holder: 6.35mm (1/4in)
No Load Speed: 0-1,000/0-2,800/0-3,250/min.
Impact Rate: 0-1,800/0-2,900/0-3,800/bpm
Max. Torque: 26/80/205Nm
Weight: 1.56kg
1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling on wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work.
No Load Speed: 5,500/min.
Max Cutting Depth @90º: 64mm
Blade: 184 x 16mm Bore
Bevel Capacity: 57°
1 x 18V DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to central motor position. The four position blade clamp allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut.
Strokes at No Load: 0-2,900/min.
Stroke Length: 28.6mm
Capacity: Wood 300mm, Steel Sections & Pipes 100mm, PVC 160mm
Weight: 2.3kg
1 x 18V DCG405 125mm XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.
No Load Speed: 9,000/min.
Disc Diameter: 125mm
Spindle Thread: M14
Weight: 1.75kg
1 x 18V DCL050 XR LED Work Light with variable light settings for maximum brightness or extended run time and a broad and even beam pattern. Perfect for inspecting areas without electricity or natural light. The articulating head has nine positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use.
Light Output: 250-500 lumens
Protection Class: IP54
Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger and 1 x DS300 TOUGHSYSTEM™ Toolbox
Delivery Information
