- <Home>
- Makita>
- Power Tools>
- Drills - SDS & Hammer>
- <SDS Max & Hex Demolition Hammers>
- HR4013C 40mm AVT SDS Max Rotary Hammer
MakitaHR4013C 40mm AVT SDS Max Rotary Hammer
The Makita HR4013C 40mm AVT SDS Max Rotary Hammer has been developed to provide higher operating efficiency and more comfort with an unrivalled low level of vibration. It has a one touch sliding chuck for easy bit installation and removal and an easy to operate operation-mode change lever. This is located on the top of the motor housing for reduced possibility of breakage.
The soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body. There is a handy LED service light that indicates when to replace carbon brush, preventing additional damage to the gearings.
The vibration absorbing housing offers unrivalled low level of vibration. In hammering mode, the on/off switch is switchable between two switches to meet your application, for Continuous or Intermittent chiselling applications.
Specification
Input Power: 1,000W
No Load Speed: 250-500/min.
Impact Rate: 1,450-2,900/bpm
Impact Energy: 8.0 joules
Max in Concrete: 40mm
Weight: 6.8kg
Vibration K factor1.5 m/sec²
Vibration: Chiselling4.5 m/sec²
Vibration: Hammer Drilling: 5 m/sec²
The Makita HR4013C 40mm AVT SDS Max Rotary Hammer has been developed to provide higher operating efficiency and more comfort with an unrivalled low level of vibration. It has a one touch sliding chuck for easy bit installation and removal and an easy to operate operation-mode change lever. This is located on the top of the motor housing for reduced possibility of breakage.
The soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body. There is a handy LED service light that indicates when to replace carbon brush, preventing additional damage to the gearings.
The vibration absorbing housing offers unrivalled low level of vibration. In hammering mode, the on/off switch is switchable between two switches to meet your application, for Continuous or Intermittent chiselling applications.
Specification
Input Power: 1,000W
No Load Speed: 250-500/min.
Impact Rate: 1,450-2,900/bpm
Impact Energy: 8.0 joules
Max in Concrete: 40mm
Weight: 6.8kg
Vibration K factor1.5 m/sec²
Vibration: Chiselling4.5 m/sec²
Vibration: Hammer Drilling: 5 m/sec²
Delivery Information
